Rubber Fuel Sleeve Customized Round Protective Cover 500mm*20m
Features of the protective cover
The protective cover is widely used in screw rods, polished rods, shafts, columns and other parts. The diameter, extension length, connection method, etc. can be bent without restriction. Generally, the extension and compression ratio of the sheath is 1000: 10, and it can also be customized according to user requirements. Make a sheath with a larger or smaller ratio.
1. This kind of shield can be used horizontally or vertically. When used horizontally, it is recommended to use a plastic or aluminum support ring to keep a certain uniform distance between the inner cavity of the shield and the screw rod to extend the service life.
2. The outer fabric is a three-proof cloth, with a hard traveler support inside, which can work normally between 110° and -40°.
3. The use range of this product is 120mt/min.
The protective cover adopts the stitching process. First, the three-proof fabric is turned out according to the drawing, and the pieces are connected and stitched, and then cut from the middle, and then the zipper is turned on. When the stretched length is large, a metal ring can be added to each compromise to improve the stability of the shield. Metal flanges are usually used for the connection or fixed end, and the hoop type can also be selected. When using, first unzip the zipper, then insert the polished rod or lead screw, and then close the zipper.
The protective cover has the characteristics of being not afraid of stepping on it, hard objects will not be deformed, resistant to coolant, oil, water, grinding wheel foam and iron pins, etc., long service life, good sealing, and light operation. The shield has a long stroke, small compression, and a length ratio of 1:10
Product Tags:
|
|
Rubber Fuel Sleeve Round Protective Cover 500mmx20m Customized Images
|
